关注 | 国标委公布首批中英互认标准清单
为进一步推动中英标准互认工作，提高中英标准一致化程度，有效促进中英两国经贸发展，2015年11月9日，中国国家标准化管理委员会与英国国家标准化机构（英国标准协会，British Standard Institute）在北京确认了《中国国家标准化管理委员会和英国标准协会首批中英互认标准清单》，现将有关事项公告如下：
一、《钢铁及合金 总碳含量的测定 感应炉燃烧后红外吸收法》等62组首批互认标准（见附件）是等同采用国际标准化组织（ISO）或国际电工委员会（IEC）相同国际标准的中英国家标准。
二、中国国家标准化管理委员会与英国标准协会相互认可清单中所列的中国国家标准与相应的英国国家标准内容一致。
中国国家标准化管理委员会和英国标准协会
首批中英互认标准清单
编号 No. | 中国国家标准号 GB/T | 中国国家标准名称 Title of Chinese standards | 英国国家标准号 BS | 英国国家标准名称 Title of BS standards | 等同采用ISO/IEC标准号 IDT ISO/IEC No. |
1 | GB/T 223.86-2009 | 钢铁及合金 总碳含量的测定 感应炉燃烧后红外吸收法 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace | Steel and iron. Determination of total carbon content. Infrared absorption method after combustion in an induction furnace 钢铁及合金 总碳含量的测定 感应炉燃烧后红外吸收法 | ISO 9556:1989 | |
2 | GB/T 1034-2008 | 塑料 吸水性的测定 Plastics - Determination of water absorption | Plastics. Determination of water absorption 塑料 吸水性的测定 | ISO 62:2008 | |
3 | GB/T 2411-2008 | 塑料和硬橡胶 使用硬度计测定压痕硬度（邵氏硬度） Plastics and ebonite - Determination of indentation hardness by means of a duronmeter (shore hardness) | BS EN ISO 868:2003 | Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness) 塑料和硬橡胶 使用硬度计测定压痕硬度（邵氏硬度） | ISO 868:2003 |
4 | GB/T 2423.1-2008 | 电工电子产品环境试验第2部分：试验方法 试验A：低温 Environmental testing - Part 2: Test methods - Tests A: Cold | 60068-2-1:2007 | Environmental testing. Tests. Test A. Cold 电工电子产品环境试验 试验 试验A 低温 | IEC 60068-2-1:2007 |
5 | GB/T 3671.1-1996 | 水溶性染料溶解度和溶液稳定性的测定 Determination of application solubility and solution stability of water-soluble dyes | 105-Z07:1998 | Textiles. Tests for colour fastness. Determination of application solubility and solution stability of water-soluble dyes 纺织品染色牢度试验水溶性染料溶解度和溶液稳定性的测定 | ISO 105-Z07:1995 |
6 | GB/T 3810.12-2006 | 陶瓷砖试验方法第12部分；抗冻性的测定 Test methods of ceramic tiles—Part 12:Determination of frost resistance | Ceramic tiles. Determination of frost resistance 陶瓷砖抗冻性的测定 | ISO 10545-12:1995 | |
7 | GB/T 3810.7-2006 | 陶瓷砖试验方法 第7部分：有釉砖表面耐磨性的测定 Test methods of ceramic tiles-Part 7:Determination of resistance to surface abrasion for glazed tiles | Ceramic tiles. Determination of resistance to surface abrasion for glazed tiles 陶瓷砖有釉砖表面耐磨性的测定 | ISO 10545-7:1996 | |
8 | GB/T 3903.36-2008 | 鞋类 鞋带试验方法 耐磨性能 Footwear - Test methods for accessories: shoe laces - Abrasion resistance | Footwear. Test methods for accessories. Shoe laces. Abrasion resistance 鞋类 鞋带试验方法 耐磨性能 | ISO 22774:2004 | |
9 | GB/T 3903.40-2008 | 鞋类 帮面试验方法 形变性 Footwear - Test methods for uppers - Deformability | Footwear. Test methods for uppers. Deformability 鞋类 帮面试验方法 形变性 | ISO 17695:2004 | |
10 | 4459.8-2009 | 机械制图 动密封圈 第1部分：通用简化表示法 Mechanical drawings - Seals for dynamic application - Part 1: General simplified representation | 9222-1:1995 | Technical drawings. Seals for dynamic application. General simplified representation 技术制图 动密封圈通用简化表示法 | ISO 9222-1:1989 |
11 | GB/T 4546-2008 | 玻璃容器 耐内压力试验方法 Glass containers - Internal pressure resistance - Test methods | Glass containers. Internal pressure resistance. Test methods 玻璃容器 耐内压力试验方法 | ISO 7458:2004 | |
12 | 4547-2007 | 玻璃容器 抗热震性和热震耐久性试验方法 Glass containers-Test methods of the thermal shock resistance and thermal shock endurance | Glass containers. Thermal shock resistance and thermal shock endurance. Test methods 玻璃容器 抗热震性和热震耐久性试验方法 | ISO 7459:2004 | |
13 | GB/T 4937.1-2006 | 半导体器件机械和气候试验方法第1部分：总则 Semiconductor devices—Mechanical and climatic test methods—Part 1:General | Semiconductor devices. Mechanical and climatic test methods. General 半导体器件机械和气候试验方法总则 | IEC 60749-1:2002 | |
14 | GB/T 5054.2-2008 | 道路车辆 多芯连接电缆 第2部分：高性能护套电缆的性能要求和试验方法 Road vehicles - Multi-core connecting cables - Part 2: Test methods and requirements for high performance sheathed cables | Road vehicles. Multi-core connecting cables. Test methods and requirements for high performance sheathed cables 道路车辆 多芯连接电缆 高性能护套电缆的性能要求和试验方法 | ISO 4141-2:2006 | |
15 | GB/T 5267.3-2008 | 紧固件 热浸镀锌层 Fasteners - Hot dip galvanized coatings | Fasteners. Hot dip galvanized coatings 紧固件 热浸镀锌层 | ISO 10684:2004 | |
16 | 5399-2004 | 纸浆 浆料浓度的测定 Pulps-Determination of stock concentration | Pulps. Determination of stock concentration 纸浆 浆料浓度的测定 | ISO 4119:1995 | |
17 | GB/T 8151.18-2012 | 锌精矿化学分析方法 第18部分：锌量的测定 离子交换-Na2EDTA滴定法 Methods for chemical analysis of zinc concentrates - Part 18： Determination of zinc content - Ion-exchange/ Na2EDTA titrimetric method | Zinc sulfide concentrates. Determination of zinc. Ion-exchange/EDTA titrimetric method 硫化锌精矿 锌量的测定 离子交换/EDTA滴定法 | ISO 12739:2006 | |
18 | GB/T 8420-2011 | 土方机械 司机的身材尺寸与司机的最小活动空间 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope | Earth-moving machinery. Physical dimensions of operators and minimum operator space envelope 土方机械 司机的身材尺寸与司机的最小活动空间 | ISO 3411:2007 | |
19 | GB/T 9185-2003 | 摄影师 135规格胶片和暗盒规范 Photography-135-size film and magazine-Specifications | Photography. 135-size film and magazine. Specifications 摄影师 135规格胶片和暗盒规范 | ISO 1007:2000 | |
20 | GB/T 9536-2012 | 电气和电子设备用机电开关第1部分：总规范 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification | BS EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment. Generic specification 电气和电子设备用机电开关总规范 | IEC 61020-1:2009 |
21 | GB/T 9793-2012 | 热喷涂 金属和其他无机覆盖层 锌、铝及其合金 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys 热喷涂 金属和其他无机覆盖层 锌、铝及其合金 | ISO 2063:2005 | |
22 | GB/T 9799-2011 | 金属及其他无机覆盖层 钢铁上经过处理的锌电镀层 Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel | Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel 金属及其他无机覆盖层 钢铁上经过处理的锌电镀层 | ISO 2081:2008 | |
23 | GB/T 12692.1-2010 | 石油产品 燃料（F类）分类 第1部分：总则 Petroleum products - Fuels (class F) - Classification - Part 1: General | Petroleum products. Fuels (class F). Classification. General 石油产品 燃料（F类）分类总则 | ISO 8216-99:2002 | |
24 | GB/T 13742-2009 | 光学传递函数测量准确度 Accuracy of optical transfer function（OTF）measurement | Optics and optical instruments. Accuracy of optical transfer function (OTF) measurement 光学和光学仪器光学传递函数测量准确度 | ISO 11421:1997 | |
25 | GB/T 13825-2008 | 金属覆盖层 黑色金属材料热镀锌层 单位面积质量称量法 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area | Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area 金属覆盖层 黑色金属材料热镀锌层 单位面积质量称量法 | ISO 1460:1992 | |
26 | GB/T 13885-2003 | 动物饲料中钙、铜、铁、镁、锰、钾、钠和锌含量的测定 原子吸收光谱法 Animal feeding stuffs—Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc—Method using atomic absorption spectrometry | Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc. Method using atomic absorption spectrometry 动物饲料中钙、铜、铁、镁、锰、钾、钠和锌含量的测定 原子吸收光谱法 | ISO 6869:2000 | |
27 | GB/T 14123-2012 | 机械冲击 试验机 性能特性 Mechanical shock - Testing machines - Characteristics and performance | Mechanical shock. Testing machines. Characteristics and performance 机械冲击 试验机 性能特性 | ISO 8568:2007 | |
28 | GB/T 14468.1-2006 | 工业机器人 机械接口 第1部分：板类 Industrial robot-Mechanical interface-Part 1: Plates | Manipulating industrial robots. Mechanical interfaces. Plates 操作工业机器人机械接口 板类 | ISO 9409-1:2004 | |
29 | GB/T 14468.2-2006 | 工业机器人 机械接口 第2部分：轴类 Industrial robot-Mechanic interface-Part 2:Shafts | Manipulating industrial robots. Mechanical interfaces. Shafts 操作工业机器人 机械接口 轴类 | ISO 9409-2:2002 | |
30 | GB/T 14790.1-2009 | 机械振动 人体暴露于手传振动的测量与评价 第1部分：一般要求 Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements | Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibration. General requirements 机械振动 人体暴露于手传振动的测量与评价一般要求 | ISO 5349-1:2001 | |
31 | GB/T 15706-2012 | 机械安全 设计通则 风险评估与风险减小 Safety of machinery — General principles for design - Risk assessment and risk reduction | Safety of machinery. General principles for design. Risk assessment and risk reduction 机械安全 设计通则 风险评估与风险减小 | ISO 12100:2010 | |
32 | GB/T 16855.1-2008 | 机械安全 控制系统有关安全部件 第1部分：设计通则 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design | Incorporates corrigendum Feb 2009 | Safety of machinery. Safety-related parts of control systems. General principles for design 机械安全 控制系统有关安全部件设计通则 | ISO 13849-1:2006 |
33 | GB/T 17048-2009 | 架空绞线用硬铝线 Hard-drawn aluminium wire for overhead line conductors | Hard drawn aluminium wire for overhead line conductors 架空绞线用硬铝线 | IEC 60889:1987 | |
34 | GB/T 17456.1-2009 | 球墨铸铁管外表面锌涂层 第1部分：带终饰层的金属锌涂层 Ductile iron pipes - External zinc-based coating - Part 1: Metallic zinc with finishing layer | 8179-1:2004 | Ductile iron pipes. External zinc-based coating. Metallic zinc with finishing layer 球墨铸铁管外表面锌涂层 带终饰层的金属锌涂层 | ISO 8179-1:2004 |
35 | GB/T 18433-2001 | 航空货运保温集装箱热性能要求 Air cargo insulated containers Thermal efficiency requirements | Air cargo. Insulated containers. Thermal efficiency requirements 航空货运保温集装箱热性能要求 | ISO 8058:1999 | |
36 | GB/T 18707.2-2010 | 机械振动 评价车辆座椅振动的实验室方法 第2部分：应用于机车车辆 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 2：Application to railway vehicle | 10326-2:2001 | Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Application to railway vehicles 机械振动 评价车辆座椅振动的实验室方法应用于机车车辆 | ISO 10326-2:2001 |
37 | GB/T 18849-2011 | 机动工业车辆 制动器性能和零件强度 Powered industrial trucks - Brake performance and component strength | Powered industrial trucks and tractors. Brake performance and component strength 机动工业车辆和牵引车 制动器性能和零件强度 | ISO 6292:2008 | |
38 | GB/T 18850-2002 | 工业用金属丝筛网 技术要求和检验 Industrial wire screens-Technical requirements and testing | Specification for industrial wire screens 工业用金属丝筛网规范 | ISO 14315:1997 | |
39 | GB/T 19949.3-2005 | 道路车辆 安全气囊部件 第3部分：气体发生器总成试验 Road vehicle--Airbag components--Part 3:Testing of inflator assemblies | 12097-3:2002 | Road vehicles. Airbag components. Testing of inflator assemblies 道路车辆 安全气囊部件气体发生器总成试验 | ISO 12097-3:2002 |
40 | GB/T 20432.1-2006 | 摄影 照相级化学品 试验方法 第1部分: 总则 Photography—Photographic-grade chemicals—Test methods—Part 1:General | 10349-1:2002 | Photography. Photographic-grade chemicals. Test methods. General 摄影 照相级化学品 试验方法 总则 | ISO 10349-1:2002 |
41 | GB/T 20462.2-2006 | 汽车用热塑性非增强软管和软管 第2部分：石油基燃油用 Thermoplastic tubing and hoses for automotive use—Part 2:Petroleum-based-fuel applications | 13775-2:2000 | Thermoplastic tubing and hoses for automotive use. Petroleum-based fuel applications 汽车用热塑性非增强软管和软管石油基燃油用 | ISO 13775-2:2000 |
42 | GB/T 20654-2006 | 防护服装 机械性能 材料抗刺穿及动态撕裂性的试验方法 Protective clothing--Mechanical properties—Test method for the determination of the resistance to puncture and dynamic tearing of materials | Protective clothing. Mechanical properties. Test method for the determination of the resistance to puncture and dynamic tearing of materials 防护服装 机械性能 材料抗刺穿及动态撕裂性的试验方法 | ISO 13995:2000 | |
43 | GB/T 20858-2007 | 玻璃容器 用重量法测定容量试验方法 Glass containers—Determination of capacity by gravimetric method—Test method | Glass containers. Determination of capacity by gravimetric method. Test method 玻璃容器 用重量法测定容量试验方法 | ISO 8106:2004 | |
44 | GB/T 21060-2007 | 塑料 流动性的测定 Plastics-Determination of pourability | Plastics. Determination of pourability 塑料 流动性的测定 | ISO 6186:1998 | |
45 | GB/T 21396-2008 | 鞋类 成鞋试验方法 帮底粘合强度 Footwear - Test methods for whole shoe - -Upper sole adhesion | Footwear. Test methods for whole shoe. Upper sole adhesion 鞋类 成鞋试验方法 帮底粘合强度 | ISO 17708:2003 | |
46 | GB/T 22087-2008 | 铝及铝合金的弧焊接头 缺欠质量分级指南 Arc-welded joints in aluminium and its alloys - Guidance on quality levels for imperfection | Welding. Arc-welded joints in aluminium and its alloys. Quality levels for imperfections 焊接铝及铝合金的弧焊接头 缺欠质量分级 | ISO 10042:2005 | |
47 | GB/T 22376.1-2008 | 胶粘剂 本体试样的制备方法 第1部分：双组份体系 Adhesives - Methods of preparing bulk specimens - Part 1: Two-part systems | 15166-1:1998 | Adhesives. Methods of preparing bulk specimens. Two-part systems 胶粘剂 本体试样的制备方法双组份体系 | ISO 15166-1:1998 |
48 | GB/T 22376.2-2008 | 胶粘剂 本体试样的制备方法 第2部分：热固化单组份体系 Adhesives - Methods of preparing bulk specimens - Part 2: Elevated-temperature-curing one-part systems | 15166-2:2000 | Adhesives. Methods of preparing bulk specimens. Elevated-temperature-curing one-part systems 胶粘剂 本体试样的制备方法热固化单组份体系 | ISO 15166-2:2000 |
49 | GB/T 22419-2008 | 工业车辆 集装箱吊具和抓臂操作用指示灯技术要求 Industrial trucks - Specification for indicator lights for container handling and grappler arm operations | Industrial trucks. Specification for indicator lights for container handling and grappler arm operations 工业车辆 集装箱吊具和抓臂操作用指示灯技术要求 | ISO 15871:2000 | |
50 | GB/T 22510-2008 | 谷物、豆类及副产品 灰分含量的测定 Cereals, pulses and by-products - Determination of ash yield by incineration | Cereals, pulses and by-products. Determination of ash yield by incineration 谷物、豆类及副产品 灰分含量的测定 | ISO 2171:2007 | |
51 | GB/T 23319.3-2010 | 纺织品 洗涤后扭斜的测定 第3部分：机织服装和针织服装 Textiles - Determination of spirality after laundering - Part 3: Woven and knitted garments | 16322-3:2005 | Textiles. Determination of spirality after laundering. Woven and knitted garments 纺织品 洗涤后扭斜的测定机织服装和针织服装 | ISO 16322-3:2005 |
52 | GB/T 23319.1-2009 | 纺织品 洗涤后扭斜的测定 第1部分：针织服装纵行扭斜的变化 Textiles - Determination of spirality after laundering - Part 1: Percentage of wale spirality change in knitted garments | 16322-1:2005 | Textiles. Determination of spirality after laundering. Percentage of wale spirality change in knitted garments 纺织品 洗涤后扭斜的测定针织服装纵行扭斜的变化 | ISO 16322-1:2005 |
53 | GB/T 24684.1-2009 | 植物保护机械 评价清洗系统的试验方法 第1部分：喷雾机整机的内部清洗 Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 1：Internal cleaning of complete sprayers | 22368-1:2004 | Crop protection equipment. Test methods for the evaluation of cleaning systems. Internal cleaning of complete sprayers 植物保护机械 评价清洗系统的试验方法喷雾机整机的内部清洗 | ISO 22368-1:2004 |
54 | 25664-2010 | 高速切削铣刀 安全要求 Milling cutters for high speed machining - Safety requirements | Milling cutters for high speed machining. Safety requirements 高速切削铣刀 安全要求 | ISO 15641:2001 | |
55 | GB/T 26106-2010 | 机械镀锌层 技术规范和试验方法 Mechanically deposited coatings of zinc - Specification and test methods | BS EN ISO 12683:2004 | Mechanically deposited coatings of zinc. Specification and test methods 机械镀锌层 技术规范和试验方法 | ISO 12683:2004 |
56 | GB/T 26749-2011 | 碳纤维 浸胶纱拉伸性能的测定 Carbon fiber-Determination of tensile properties of resin-impregnated yarn | Carbon fiber. Determination of tensile properties of resin-impregnated yarn 碳纤维 浸胶纱拉伸性能的测定 | ISO 10618:2004 | |
57 | GB/T 26949.1-2012 | 工业车辆 稳定性验证 第1部分：总则 Industrial trucks - Verification of stability - Part 1: General | 22915-1:2008 | Industrial trucks. Verification of stability. General 工业车辆稳定性验证总则 | ISO 22915-1:2008 |
58 | GB/T 27544-2011 | 工业车辆 电气要求 Industrial trucks-Electrical requirements | Industrial trucks. Electrical requirements 工业车辆 电气要求 | ISO 20898:2008 | |
59 | GB/T 27579-2011 | 精油 高效液相色谱分析 通用法 Essential oils - Analysis by high performance liquid chromatography - General method | Essential oils. Analysis by high performance liquid chromatography. General method 精油 高效液相色谱分析 通用法 | ISO 8432:1987 | |
60 | 27580-2011 | 精油和芳香萃取物 残留苯含量的测定 Essential oils and aromatic extracts - Determination of residual benzene content | Essential oils and aromatic extracts. Determination of residual benzene content 精油和芳香萃取物 残留苯含量的测定 | ISO 14714:1998 | |
61 | GB/T 27679-2011 | 铜、铅、锌和镍精矿 检查取样精密度的实验方法 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling | Copper, lead, zinc and nickel concentrates. Experimental methods for checking the precision of sampling 铜、铅、锌和镍精矿 检查取样精密度的实验方法 | ISO 12744:2006 | |
62 | GB/T 27680-2011 | 铜、铅、锌和镍精矿 检查取样误差的实验方法 Copper，lead，zinc and nickel concentrates - Experimental methods for checking the bias of sampling | Copper, lead, zinc and nickel concentrates. Experimental methods for checking the bias of sampling 铜、铅、锌和镍精矿 检查取样误差的实验方法 | ISO 13292:2006 |
- End -
猜你喜欢
信息来源 | 国家标准委
点击【阅读原文】登录质量与认证官网
获取更多质量领域、检测认证信息